BMX Race-Start Dynamics: Coupling On-Track Measurements and Physics-Based Modelling for Performance Optimisation
DOI:
https://doi.org/10.28985/1425.jsc.17Keywords:
BMX Racing, Start Mechanics, Gear Ratio, Instrumented Crank, OptimisationAbstract
A fast and stable launch is decisive in Bicycle Moto-Cross (BMX) racing, yet the underlying interplay between rider power production, bicycle gearing and ramp geometry has received little attention in the engineering literature. Using high-frequency field measurements gathered on the Olympic track of Saint Quentin-en-Yvelines (France), we develop and validate a physics-based model that predicts the rider’s velocity profile over the start ramp. The formulation combines (i) a Hill-type linear torque–cadence relationship fitted to instrumented-crank data, (ii) an energy balance that accounts for aerodynamic and rolling losses, and (iii) the measured track slope. Model predictions agree with experiments for three gear ratios. We then explore two practical optimisation criteria—minimum time to the first bump and maximum mean acceleration on the ramp—to identify gearing strategies tailored to individual athletes. The framework illustrates how on-track sensing can be translated into actionable engineering guidelines for coaches and riders.
Downloads
References
Herlihy D.V. Bicycle: the history. Yale University Press, 2004.
Steinbach A.B. Social facilitation in bmx racing. Halle: Faculty of Sports Sciences of the Martin Luther-Universitat Halle-Wittenberg, University of Halle, 2014.
Union Cycliste Internationale. UCI cycling regulations, part VI: BMX racing. https://assets.ctfassets.net/761l7gh5x5an/122Ylx2XJjbqzh6xPCu7sK/1bf2d669421b125e5c8c9a5262799904/20221205_-6-BMX-ENG-left_column_final.pdf, 2023. Official regulations defining minimum dimensions and standards; consulted 2023 edition.
Wade N. The historical mediatization of BMX-freestyle cycling. Sport in Society, 13(7-8):1152– 1169, 2010.
Koellner A., Cameron C.J., and Battley M.A. Structural responses on a BMX racing bicycle. Procedia Engineering, 72:618–623, 2014. The Engineering of Sport 10.
Bertucci W., Hourde C., Manolova A., and Vettoretti F. Facteurs mécaniques de la performance lors de la phase d’accélération en BMX chez des pilotes entraînés. Science & Sports, 22(3):179–181, 2007.
Debraux P. and Bertucci W. Determining factors of the sprint performance in high-level BMX riders. Computer Methods in Biomechanics and Biomedical Engineering, 14(sup1):53–55, 2011.
Bertucci W. and Hourde C. Laboratory testing and field performance in BMX riders. J Sports Sci Med, 10(2):417–419, 2011.
Debraux P., Manolova A.V., Soudain-Pineau M., Hourde C., and Bertucci W. Maximal torque and power pedaling rate relationships for high level BMX riders in field tests. Journal of Science and Cycling, 2:51–57, 2013.
Cowell J.F., Cronin J.B., and McGuigan M.R. Time motion analysis of supercross BMX racing. J Sports Sci Med, 10(2):420–421, 2011.
Cowell J.F., McGuigan M.R., and Cronin J.B. Movement and skill analysis of supercross bicycle motocross. The Journal of Strength & Conditioning Research, 26(6), 2012.
Zabala M., Requena B., Sanchez-Munoz C., Gonz´alez-Badillo J.J., Garcıa I., Oopik V., and Paasuke M. Effects of sodium bicarbonate ingestion on performance and perceptual responses in a laboratory-simulated BMX cycling qualification series. The Journal of Strength & Conditioning Research, 22(5):1645–1653, 2008.
Maw S., Proctor L., Vredenburg J., and Ehlers P. Influence of starting position on finishing position in world cup 500 m short track speed skating. Journal of Sports Sciences, 24(12):1239– 1246, 2006.
Pilianidis T., Kasabalis A., Mantzouranis N., and Mavvidis A. Start reaction time and performance at the sprint events in the olympic games. Kinesiology, 44(1):67–72, 2012.
Rylands L. and Roberts S.J. Relationship between starting and finishing position in world cup BMX racing. International Journal of Performance Analysis in Sport, 14(1):14–23, 2014.
Grigg J., Haakonssen E., Orr R., and Keogh J.W. Literature review: Kinematics of the BMX gate start. Journal of Science and Cycling, 6(1):3–10, Jun. 2017.
Di Rienzo F., Martinent G., Levêque L., MacIntyre T., Collet C., and Guillot A. The influence of gate start position on physical performance and anxiety perception in expert BMX athletes. Journal of Sports Sciences, 36(3):311–318, 2018.
Princelle D. Analyse biomécanique multi corps et évaluation de la performance lors du départ en BMX race. Theses, Université de Poitiers, May 2021.
Mateo-March M., Fernandez-Pena E., Blasco-Lafarga C., Morente-S´anchez J., and Zabala M. Does a non-circular chainring improve performance in the bicycle motocross cycling start sprint ? J Sports Sci Med., 13(1):97–104, 2014.
Mateo M., Blasco-Lafarga C., and Zabala M. Pedaling power and speed production vs. technical factors and track difficulty in bicycle motocross cycling. The Journal of Strength & Conditioning Research, 25(12), 2011.
Zabala M., Sanchez-Munoz C., and Mateo M. Effects of the administration of feedback on performance of the BMX cycling gate start. Journal of Sports Science and Medicine, 8:393–400, 2009.
Grigg J., Haakonssen E., Rathbone E., Orr R., and Keogh J.W.L. The validity and intra-tester reliability of markerless motion capture to analyse kinematics of the BMX supercross gate start. Sports Biomechanics, 17(3):383–401, 07 2018.
Elvira J.L.L., Mateo-March M., Zabala M., and Blasco-Lafarga C. The use of accelerometry to evaluate the BMX cycling starting hill. effect of the q-ring on the acceleration profile. Sports Biomechanics, 22(7):906–920, 07 2023.
Union Cycliste Internationale. UCI BMX track guide. https://assets.ctfassets.net/761l7gh5x5an/3bfMtEa6B9acxJjLjp53EU/c126181d241519b0d055365fe4867755/uci-bmx-track-guide-2017-v-final.pdf, 2017. Guidelines on BMX track and start hill geometry for UCI-sanctioned events.
Wooles A.L., Robinson A.J., and Keen P.S. A static method for obtaining a calibration factor for srm bicycle power cranks. Sports Engineering, 8(3):137–144, 2005.
Bobbert M.F. Why is the force-velocity relationship in leg press tasks quasi-linear rather than hyperbolic? Journal of Applied Physiology, 112(12):1975–1983, 2012.
Sargeant A.J., Hoinville E., and Young A. Maximum leg force and power output during short-term dynamic exercise. J Appl Physiol: Respirat Environ Exercise Physiol, 51:1175–1182, 1981.
McCartney N., Heigenhauser G.J., and Jones N.L. Power output and fatigue of human muscle in maximal cycling exercise. Journal of Applied Physiology: Respiratory, Environmental and Exercise Physiology, 55(1):218–224, 1983.
Vandewalle H., Peres G., Heller J., Panel J., and Monod H. Force-velocity relationship and maximal power on a cycle ergometer. Eur J Appl Physiol, 56:650–656, 1987.
Dorel S., Hautier C.A., Rambaud O., Rou”et D., Van Praagh E., Lacour J.R., and Bourdin M. Torque and power-velocity relationships in cycling: Relevance to track sprint performance in world-class cyclists. Int J Sports Med, 26:739–746, 2005.
Rivière J.R., Peyrot N., Cross M., Messonnier L., and Samozino P. Strength-endurance: Interaction between force-velocity condition and power output. Frontiers in Physiology, 11:1237, 2020.
Downloads
Published
How to Cite
Issue
Section
Copyright (c) 2025 Journal of Science and Cycling

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

