The Impact of Tyre Width, Pressure and Surface Condition on Rolling Resistance and Vibration Transmission of Bicycle Tyres
Keywords:
rolling resistance, vibration transmission, tyre pressure, tyre width, bicycle dynamics, treadmill testingAbstract
Rolling resistance and vibration transmission are critical parameters influencing the mechanical efficiency and comfort in competitive cycling. Optimising a tyre setup requires the consideration various metrics such as rider-system mass, tyre width, tyre filling pressure, and surface conditions in parallel. In this study, the combined effects of tyre width and tyre filling pressure on rolling resistance and frame-transmitted vibrations were evaluated under laboratory conditions. Five tyre widths of one tyre model were tested across four rider-system weights, two surface condition (tarmac and cobblestones), and multiple filling pressures. The experiments showed significant non-linear relationships between tyre width, filling pressure, and rolling resistance, with surface conditions contributing a secondary effect. A Vibration analysis revealed that wider tyres substantially reduce surface-induced accelerations, whereas tyre pressure showed a minor but detectable influence. These findings support the development of rider-specific optimisation indices that balance rolling resistance and vibration sensitivity. Further research should integrate physiological responses to vibratory stimuli to refine setup recommendations for individual athletes.
Downloads
References
ISO 5775-1:2023(en). Bicycle tyres and rims — Part 1: Tyre designations and dimensions.
ETRTO (2024). ETRTO Recommendations – Edition 2, September 2024. Retrieved from https://www.etrto.org/Recommendations
Avery, K. (2021). Vittoria White Paper: Structure and Benefits of Tubular, Clincher and Tubeless Clincher Construction.
Schwalbe (2025). Tuning for Ultimate Performance. Retrieved from https://www.schwalbe.com/en/pressureprof/
Continental (2025). Tire Knowledge: Tire-Rim Combinations and ETRTO Standards. Retrieved from https://www.continental-tires.com/products/b2c/tire-knowledge/tire-rim-combinations-etrto-standards/
Reiser, R., Watt, J., & Peterson, M. (2003). Cycling on rollers: influence of tyre pressure and cross section on power requirements. Sports Biomechanics, 2(2), 237–249. doi: 10.1080/14763140308522820
Viellehner, J., & Potthast, W. (2022). Upper body vibration transmission in cycling. ISBS Proceedings Archive, 40(1), 736.
Viellehner, J. (2021). Vibrationen im Radsport: Der Effekt eines Rennrad-Dämpfungssystems auf die neuromuskuläre Leistungsfähigkeit.
Gravaa (2022). Adjust Your Tire Pressure In Paris-Roubaix 2022, Retrieved from https://www.gravaa.com/en/benefits-of-right-tire-pressure-during-paris-roubaix/
Buder, J., Schwanitz, S., & Odenwald, S. (2024). Benchmarking rolling resistance of bicycle tyres on a laboratory treadmill. doi: 10.17028/rd.lboro.27045271.v1
Downloads
Published
How to Cite
Issue
Section
Copyright (c) 2025 Journal of Science and Cycling

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

